ADB FASTBOOT DOWNLOAD MOTO G INSTALL

Note: If firmware includes four system.img_sparsechunk or you do not want to erase the userdata, you can modify the command. Mfastboot flash system system.img_sparsechunk.2 Mfastboot flash system system.img_sparsechunk.1 Mfastboot flash system system.img_sparsechunk.0 In the command window, issue the following commands one by one:.Now, launch a command window from inside the firmware folder (click shift key, right click and select open command window here option).Connect your phone to your PC via USB cable.To do so, turn off your phone and then press and hold the Volume (-) and Power buttons simultaneously for a few seconds. Reboot your Moto G into the Bootloader Mode.Download and extract mfastboot and copy its content to the same folder where the extracted firmware files.Extract the downloaded firmware file to a folder.If you face a not working SIM or WiFi, extract the downloaded ROM zip file and navigate to extracted firmware folder using cmd and issue:

ADB FASTBOOT DOWNLOAD MOTO G INSTALL

It will take some time to install the ROM.

Open command prompt and execute: adb push rom.zip /sdcard/rom.zip.

Now, from recovery wipe /data and media.

If not, get it over here and install it over your device

If Moto G drivers have installed properly, the phone will show up.

Connect your phone to your PC and open command prompt and issue the command: cd.

Recovery will have adb on by default, so leave recovery as it is.

Boot your phone into custom recovery mode.

You are going to require Stock firmware zip file for Moto G XT1028, XT1031, XT1032, XT1033 and XT1034 which can be downloaded over here.

You need to have a custom recovery (CWM/TWRP) installed.

Well, there are two ways to fix this one out:

Adb fastboot download moto g